Skip to main content

Running large radio telescope software on top of PyPy and twisted

Hello.

As some of you already know, I've recently started working on a very large radio telescope at SKA South Africa. This telescope's operating software runs almost exclusively on Python (several high throughput pieces are in C or CUDA or directly executed by FPGAs). Some cool telescope pictures:


(photos courtesy of SKA South Africa)

Most of the operation software is using the KatCP protocol to talk between devices. The currently used implementation is Open Source software with a custom home built server and client. As part of the experiments, I've implemented a Twisted based version and run in on top of CPython and PyPy for both the default implementation and the one based on Twisted to see how those perform.

There are two testing scenarios: the first one is trying to saturate the connection by setting up multiple sensors that report state every 10ms, the second one is measuring a round-trip between sending a request and receiving the response. Both numbers are measuring the number of requests per 0.2s, so the more the better. On X axis there is a number of simultanously connected clients.

All benchmark code is available in the KatCP repository.

The results are as follows:


As you can see, in general Twisted has larger overhead for a single client and scales better as the number of clients increases. That's I think expected, since Twisted has extra layers of indirection. The round trip degradation of Twisted has to be investigated, but for us scenario1 is by far more important.

All across the board PyPy performs much better than CPython for both Twisted and a home-made solution, which I think is a pretty good result.

Note: we didn't roll this set up into production yet, but there are high chances for both twisted and PyPy to be used in some near future.

Cheers, fijal

Comments

Anonymous wrote on 2010-11-16 01:56:

Why not try PyZmq (https://www.zeromq.org/bindings:python):)? the IPython project(https://ipython.scipy.org/moin/) is also moving from Twisted
to PyZmq.

Maciej Fijalkowski wrote on 2010-11-16 06:23:

Sorry this is not an apropriate forum to discuss this. One of the reasons would be that Twisted and PyZmq are doing two completely different things and PyZmq won't work on PyPy.

Michal M. wrote on 2010-11-16 07:59:

Oh, I envy you. And congratulations.
Keep working.
I wait for 2.6 compatible ver. of PyPy to try it with my little project.

A widząc, że prawdopodobnie rodak, to tym bardziej się cieszę.

glyph wrote on 2010-11-16 09:13:

Maciej, this is great news. Congratulations.

I look forward to making PyPy+Twisted even faster from the Twisted side :).

Alessio Sclocco wrote on 2010-11-17 14:00:

Hi Maciej,

You say that there you are mostly using Python and sometimes C, CUDA or FPGAs.
I am writing my master thesis in the Netherlands, it is about the efficient implementation of a beam forming algorithm (the one used by the LOFAR) on modern GPUs using CUDA and OpenCL. Do you have some papers or other material there about the telescope software ? I would be really interested on citing it on the related works part.

Maciej Fijalkowski wrote on 2010-11-17 16:26:

Hey Alessio. I think this blog is not really a good medium for 2-way communication feel free to come to #pypy on irc.freenode.net or write to me directly at fijall at gmail.

In general, we don't want beam forming to be performed on GPU (because it's hard), but rather on custom-built hardware and FPGAs.

Anonymous wrote on 2010-11-21 10:40:

I have a program using Python and Twisted where I load tested both server and client connections (the program can do both the server and client protocol). I tested both types out to 100 connections (at 50 milli-second polling intervals) while measuring CPU load.

What I found was that when acting as a server it scaled fairly linearly. When acting as the client side however, load rose to a peak about 60 clients, then fell by a third until 80 clients, and then rose again until at 100 clients it reached the same load level as at 60. If you have a similar situation you may need to watch out for this phenomenon.

I also found that using the epoll reactor on Linux made a *big* difference to capacity in my applications, much more so than any normal program optimization efforts that I made. I have multiple clients and multiple server ports all running simultaneously, so I'm not sure how this may translate to your application if you are only using Twisted as a server.

Here's a link to my project web site where I show the connections versus CPU load chart (first chart):

https://mblogic.sourceforge.net/mblogichelp/general/Capacity-en.html

I haven't tested this with PyPy as I don't have a combination of anything that is both 32-bit *and* new enough to run a recent version.

Maciej Fijalkowski wrote on 2010-11-21 12:16:

PyPy has 64bit support these days.

Anonymous wrote on 2010-11-22 20:28:

I also made the previous anonymous post on the 21st. I haven't been able to get the 64 bit JIT version to run or build. That may be my fault, but I haven't been able to test it (this isn't a problem that I want to waste your time on however).

I have tested the non-JIT Pypy using a simplified version of my server and client programs, using asyncore instead of Twisted. The server and client use a standard industrial automation protocol to talk to each other over a TCP socket. The programs also make heavy use of list slicing and struct.

The non-JIT version passes all the tests I have for the server, and runs my application performance test at roughly 1/3 the speed of CPython 2.6. This is very impressive, as I have never been able to get either IronPython (on Mono) nor Jython to even run the programs, let alone pass my functional tests. The fact that Pypy (non-JIT) can run these programs perfectly without changes is something that I find very promising.

Please continue the good work, and thank you for what you've done so far!

Maciej Fijalkowski wrote on 2010-11-23 08:13:

Hey, great to hear!

Well, the non-JIT version would rather be slow, but that's fine :) We try very hard to produce a compliant python interpreter and twisted folk helped us greatly with getting all the posix stuff right.

Cheers,
fijal

Unknown wrote on 2010-11-26 23:53:

I would be very interested if someone could provide some info on how to get twisted working on pyp. I have managed to install twisted in the pypy setup but starting it produces:
AttributeError: 'module' object has no attribute 'load_dynamic'
coming from zope